L60R HIREACH #6064

Contact Details

Dealership: JDC
Sales Contact: Joe Thompson
Phone Number: 419.612.7663
Email: joethompson@teamjdc.com

CAB and CHASSIS

2015 Freightliner M-2 106
297,646 miles as of 11/25
VIN Number: 1FVACXDT2FHGG5455
13,000 lb. front axle capacity
20,000 lb. rear axle capacity
33,000 lb. GVWR
Cumming ISB 6.7 260 HP engine (660 lb/ft torque)
Allison 3500 RDS Automatic Transmission
224″ wheelbase / 158″ cab to axle
(2) 50-gallon fuel tanks
Air Brakes
Goodyear 295/75R22.5 16 ply front tires
Goodyear 295/75R22.5 14 ply rear tires
Polished Wheels
Blue Exterior Paint

L60R Unit Details

• Basic unit includes a base assembly supporting a rear-mounted rotating turret.
• Hydraulically powered continuous rotation mechanism.
• Oil reservoir mounted to truck frame.
• Includes hydraulic oil and manual hydraulic controls mounted to the turret.
• Electronic proportional three-stick remote controls on the platform.
• Base-mounted “MH” type hydraulically powered, individually controlled rear main outriggers.
• “A” type secondary outriggers located behind the cab.
• Steel three-section hydraulically telescoping boom.
• One double-acting 6″ lift cylinder plus one 3″ piggyback extension cylinder.
• Exposed cable carrier running to the boom tip.
• Electronic self-leveling and rotating 40″ x 60″ EZR work platform.
• Remote platform leveling from platform controls.
• Includes power take-off and pump drive.
• Equipped with a pressure gauge and holding valves on all cylinders.
• Remote start/shutdown at both upper and lower control stations.
• 12-volt emergency pump with switch access at upper and lower controls.
• PTO hour meter included.
• Backup alarm installed.
• Fire extinguisher mounted.
• Includes two body harnesses with lanyards.
• Safety triangle kit included.
• Unit installed on chassis, tested, checked, and ready to operate.
• Certified to ANSI A92.2 standards for vehicle-mounted elevating and rotating aerial devices.
• Platform capacity rated at 500 lbs.

Options

18’ Steel Bed with Grip Deck Coating
Tie Down Rail on Both Sides
Full Fender Skirts Each Side
Strobe Lights
Full Aluminum Toolbox Package Complete
Full Rear Step Bumper w/ Hitch
Oxy/Acetylene Bottle Well in Bed
Remote Welder Start/Stop in Platform
Welder Mount Above Cross Box
(4) 20”x20”x2” Wood Outrigger Pads
Cab Windshield Guard
Steel Cable Carrier
110 Volt Line to Platform
Hot Sift PTO
(2) Sign Face holders Mounted on the Platform
500lbCapacity Jib Mounted in the Platform
5,900lp Capacity Winch w/ Anti-Two Block and Two Part Hook