Pre-Owned

D 105 Digger Derrick

D105 Digger Derrick #7729

Contact Details

Location: Omaha, NE - Elliott Equipment Company
Sales Contact: Paul Cassidy
Phone Number: 603-321-5664
Email: paul.cassidy@elliottequip.com

Base Unit

Rear mount sub frame and an 18′ steel 3-piece bed integral to sub frame. A 28’6″ retracted to 95′-0″ extended 4-section proportional boom. Sheave head shall be equipped with three sheaves. Winch features a 15,000 lb. bare drum pull with 335′ of 7/8″ diameter synthetic rope and a 12,000 lb. single line pull. External boom hard-wired anti-two-block and Load Moment Indicator (LMI) hydraulic overload protection system. Continuous rotation. Hydraulic system include a piston pump, 119 gallon oil reservoir with sight and temperature gauge, 10 micron return line filter, and single gate valve on suction line. Oil cooler. Rotating, front entry, open air operator station with reclining seat and controls that rotate with turret. Includes engine start/stop switch, bubble level gauge, signal horn, variable speed throttle, lifting capacity chart, range diagram chart, boom angle indicator, system pressure gauge, cup holder, 12V power outlet, and height adjustable back rest. 20,000 ft./lb. two-speed auger with 3″ hex drive. 3″ Kelly bar. 41′ digging radius. Two sets of “Out-and-Down” type outriggers located at front and rear with 20′ center to center extended span and equipped with removable ball socket aluminum pads. Ground operated outrigger controls under each side of bed. Emergency stops located on both sides of the bed and lower operator station. Full and mid-span outrigger load chart. Horizontal type boom rest at end of sub frame. Downhaul weight with hook. Maximum tip height of 105′ and maximum lifting capacity of 15 US tons at 10 radius. 360 degree stability on most chassis’ without front stabilizer. Unit certified to ANSI/ASSE A10.31 for Digger Derricks.

Chassis

Mounted on 2021 Freightliner M2-106. 6×6. Allison 3000 RDS Automatic Transmission

Bed Options

18′ Steel 3-Piece Bed With LED Lights and Grip Deck Coating (Included in Base Price)

Tool Box Options

30″ x 24″ x 24″ Aluminum Underbody Mounted Toolbox

Flighting Options

24″ Auger Flighting (3″ Hex)

Additional Options

  • XL Hydraulic Pole Claw (Includes Gripping and Tilting Functions)(Requires Dual Hose Reel Option)
  • Dual Boom Mounted Hose Reels for Pole Claw
  • 5-Function Radio Remote Controls w/ LMI screen
  • Hydraulic Tool Circuit With Accessory Lines at Rear of Bed (6 gpm)
  • Vertical Holder On Bed For 15-ton Hook Block

Technical Specs

SHEAVE HEIGHT (MAXIMUM)

107’/32,6 M

SHEAVE HEIGHT (RETRACTED)

40’/12,2 M

HORIZONTAL REACH (MAXIMUM)

92’/28 M

HORIZONTAL REACH (INTERMEDIATE)

42’/12,8 M

HORIZONTAL REACH (RETRACTED)

26’/7,9 M

LIFTING CAPACITY (MAXIMUM)

50,000 LB/22 679 KG

LIFTING CAPACITY @ 10’ RADIUS

30,000 LB/13 608 KG

BOOM ELEVATION LIMITS

-8/+80 DEGREES

WINCH SINGLE LINE PULL

12,000 LB/5443 KG

BOOM ROTATION

360 DEGREES CONTINUOUS

DIGGER MOTOR TORQUE

20,000 FT-LB/27 116 NM

DIGGER SPEED (HIGH/LOW)

80 RPM / 35 RPM

DIGGING RADIUS (MAXIMUM)

41’/12,5 M

DIGGING RADIUS (MINIMUM)

24’/7,3 M

OUTRIGGER CONFIGURATION

OUT-DOWN

RECOMMENDED GVWR

20’/6,1 M

OUTRIGGER SPREAD (MID-SPAN)

13’11”/4,2 M

CERTIFICATION

ANSI A10.31 FOR DIGGER DERRICKS